Stringer Cut, Rig, Install Tech

Moncks Corner, SC
Full Time
Student (High School)

Stringer Cut, Rig & Install 

Position Summary: 

The Stringer Cut, Rig & Install position is responsible for preparing, cutting, rigging, and installing stringer systems into boat hulls according to Sea Fox quality and production standards. This position requires accuracy, attention to detail, safe use of tools and equipment, and the ability to work efficiently in a fast-paced manufacturing environment. 

Essential Duties & Responsibilities 

  • Cut and trim stringers according to model specifications and production requirements. 

  • Prepare stringer systems for installation, including necessary rigging and component preparation. 

  • Measure, mark, drill, cut, and modify stringers as required for proper fit and installation. 

  • Install stringer systems into boat hulls while maintaining proper placement, alignment, and fit. 

  • Perform necessary rigging work prior to installation, including routing or preparing areas for hoses, wiring, plumbing, fuel systems, and other components as required. 

  • Read and follow production specifications, measurements, templates, and work instructions. 

  • Safely operate grinders, drills, saws, pneumatic tools, and other production equipment. 

  • Inspect work throughout the process to identify fit, quality, or installation issues before the boat moves to the next stage of production. 

  • Work closely with supervisors and other departments to resolve production or quality concerns. 

  • Maintain production pace while ensuring workmanship meets Sea Fox quality standards. 

  • Properly use and maintain tools, equipment, and personal protective equipment (PPE). 

  • Keep the work area clean, organized, and free of unnecessary materials and safety hazards. 

  • Follow all Sea Fox safety procedures, including requirements related to fiberglass, dust, chemicals, power tools, and other manufacturing hazards. 

  • Minimize material waste and use company supplies and consumables responsibly. 

  • Assist with other production duties as assigned. 

Qualifications & Skills 

  • Previous boat manufacturing, fiberglass, assembly, rigging, construction, or similar manufacturing experience preferred. 

  • Experience using hand tools, power tools, grinders, drills, and saws preferred. 

  • Ability to accurately use a tape measure and follow measurements and specifications. 

  • Strong mechanical aptitude and problem-solving skills. 

  • Ability to recognize proper fit, alignment, and workmanship. 

  • Ability to work independently as well as part of a production team. 

  • Dependable attendance and ability to maintain expected production standards. 

  • Willingness to learn Sea Fox manufacturing processes and quality requirements. 

Physical Requirements 

  • Ability to stand, bend, kneel, crouch, climb, and work in confined or awkward positions for extended periods. 

  • Ability to regularly lift and move materials, tools, and components associated with boat production. 

  • Ability to work in a manufacturing environment- may include fiberglass dust, fumes, noise, heat, and other production-related conditions. 

  • Ability to wear required PPE, including safety glasses, hearing protection, gloves, respirators, and other protective equipment as required. 

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 07/31/2029
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*